Inserting A Magazine From Cas - Fujitsu ETERNUS LT160 User Manual

(1) External door
(2) Internal door
(3) Magazine insertion/ejection port
(4) Positioning projection
The following explains how to insert and eject a magazine using CAS.

1.1.4.1 Inserting a magazine from CAS

1) After the CAS external door is unlocked with an operation from the operator panel,
2) Holding the handle on the rear of the magazine, insert the magazine from the
C144-E072-01EN
Door that covers the magazine insertion/ejection port. The external door is normally
locked by covering the magazine insertion/ejection port. The external door can be
unlocked by using an operation from the operator panel so that a magazine can be
inserted or ejected. By closing this door after inserting a magazine, an inventory of
the magazine is made to manage information about cartridges in the magazine.
Safety door to screen off the operator from the device interior when no magazine is
inserted in CAS
Port for inserting a magazine into the device or ejecting it from the device.
Projection with a tilt to position the magazine correctly in CAS
the external door opens slightly. By hand, gently open the external door to the left
until you hear a click.
magazine insertion port into the CAS and push it into its normal position.
1.1 Device Configuration
1-11