Inserting And Ejecting A Floppy Disk - Fujitsu PRIMERGY TX300 S4 User Manual

1.4.5 Inserting and Ejecting a Floppy Disk

Cautions
When using floppy disks, note the following points to avoid failures:
• Do not expose the disk to any fluids.
• Do not open the shutter of the floppy disk and touch the disk surface.
• Do not bend the floppy disk or place heavy objects on it.
• Do not expose the floppy disk to strong magnetic fields.
• Do not drop the floppy disk on hard surfaces.
• Do not store the disk in extremely hot or cold conditions.
• Do not store the disk in humid or dusty conditions.
• Do not put layers of labels on the floppy disk. Doing so may cause the drive to be clogged with the
disk.
• Keep the disk away from moisture condensation or water droplets.
Inserting a floppy disk
Use a floppy disk formatted in DOS/V. Operations are not guaranteed when you use other floppy
disks.
1
Insert the floppy facing the label up into the floppy disk drive at the side with a
shutter.
It makes a clicking sound and the floppy disk eject button pops out.
Floppy disk
PRIMERGY TX300 S4 User's Guide
37