Table of Contents
Advertisement
Remote Panel Operation
-
The cleaning cartridge/diagnostic cartridge storage cell and reserve cell are installed in
Cell Column5 and information about these cells can be referenced. The following table
lists the display contents.
-
5-14
Explanation of status
Display item
Normal
Forbidden
Cell Error
BCR Error
Media Error
Unknown Label
Unusable cell
Cleaning cell that stores cleaning cartridge
Display item
Cell No.
Barcode Label
Count
Media status
Media type
Explanation
Indicates that the cartridge is normal.
Indicates that the cartridge is not the one to be stored in the
cell.
Indicates that the cell has a failure.
Indicates that a barcode reader failure occurred and that the
barcode label might not be read correctly.
Indicates a cartridge error.
Indicates that the barcode label of the cartridge does not
meet the standard.
Indicates that the cell cannot be used because of a CIC
sensor error.
Explanation
Indicates a physical address.
The bar code label of the cartridge stored in the cell is
displayed
-
If the bar code label cannot be identified or no bar
code label is affixed, "No_Label" is displayed.
-
If there is no cartridge, "No_Tape" is displayed. In
such case, "Media status" and "Media type" are not
displayed.
Left side: Indicates the number of times of using the
cleaning cartridge.
Right side: Indicates the number of times that the cleaning
cartridge can be used.
Indicates the status of cleaning cartridge.
Normal: Indicates that the cartridge can be used.
Media Error: Indicates that the cartridge cannot be used
due, for example, to a media error.
Limit: Indicates that the cartridge cannot be used because
the maximum usage count has been reached.
For other statues, see
Explanation of
Indicates the cartridge type. Normally, LTO-C is
displayed. If the type cannot be identified, "Unknown" is
displayed.
status.
C144-E072-01EN
Advertisement
Table of Contents
Troubleshooting
