Installation - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

Installation

Install a new firewall to brake valve gasket and install

the brake valve, making sure that the brake link rods

(1) are installed into the poppet sleeves (2). Install and

tighten the three mounting bolts (3). See the Pedal

and Pedal Switch Adjustment Section of this Service

Manual for the brake pedal adjustment procedure.

Install new O-rings on all hose and tube connectors.

Install the supply and return lines, the right and left brake

lines (1) and the brake switch connectors (2). Start vehicle

and check for leaks and proper brake switch operation.

Section 33 - Brakes - Chapter 1

Install the right side air duct.

If equipped, install the foot throttle.

Install top steering column cover and connect all

electrical connectors.

Table of Contents

T8020 T8030 T8040