STEP 176
To replace the heater control valve:
1. See ACCESSING THE HVAC BOX, page 90.
2. Move the controller mounting plate forward to
gain better access to the valve.
3. Disconnect the control valve from the harness.
NOTE: Be prepared to collect a small amount of
coolant when the valve hoses are disconnected.
4. Pinch the clamp (1) and disconnect the inlet
hose to the core from the valve. Pinch the clamp
(2) and disconnect the supply hose at the bottom
of the valve. Remove the valve.
5. Install a new heater control valve to the same
connecting hoses. Connect the valve to the
harness.
Section 50 - Climate Control - Chapter 2
HEATER CONTROL VALVE REPLACEMENT
50-2-97
RD02G116
1
2
RD02G115