Exploded View Of Clutch; Compressor Clutch Replacement - New Holland T8010 Manual

Exploded View of Clutch

1
1. COIL ASSEMBLY
2. PULLEY
3. BEARING

Compressor Clutch Replacement

STEP 108
Method 1: Use a ammeter, voltmeter and a 12 volt
battery to check the amperage of the clutch coil. The
current draw must be 3.6 to 4.2 amperes at 12 volts.
A reading of more than 4.2 amperes indicates a short
within the coil.
No amperage reading indicates an open circuit in the
coil.
Replace the clutch coil if the amperage reading is not
correct.
OR
Method 2: Measure resistance. Resistance must be
2.86 to 3.3 ohms. Replace the clutch coil if the
resistance reading is not correct.
Section 50 - Climate Control - Chapter 2
2
3
4
4. BEARING DUST COVER
5. FRONT PLATE
6. SHIM(S)
50-2-71
5
7. DUST COVER
8. COMPRESSOR
1
1. AMMETER
8
6
7
1016L9
2
2. 12V BATTERY
102L7