New Holland T8010 Manual page 842

Full Function Position
Remote Valve Function Control -
Full Function Position
In the full function position the remote control lever
will have full function including the float position.
To operate the remote hydraulics in a float condition,
make sure the remote function control is in the full
function position and push the remote control lever
fully forward.
Neutral Lock Position
Remote Valve Function Control -
Neutral Lock Position
The remote hydraulic control levers can be locked in
the neutral position. This prevents a remote lever
from being accidentally operated during transport.
This can be done by moving the remote control lever
to the neutral position and rotating the remote
function control to the right lock position.
NOTE: This must be done for each remote control
lever that you intend to be locked out.
Section 35 - Hydraulic Systems, 3PT - Chapter 5
RH97J002
RH97J002
35-5-11
No Float Position
Remote Valve Function Control
FLOAT
RETRACT DETENT
MOMENTARY
MOMENTARY
EXTEND DETENT
Remote Control Lever Positions -
No Float Position
To operate in a no float position, rotate the remote
function control to the float lockout position as shown.
Now the remote control lever cannot be moved into
the float position.
RH97J002
FLOAT POSITION
LOCKED OUT
NEUTRAL