Compressor Removal - New Holland T8010 Manual

Compressor Removal

STEP 132
Open the hood and remove the right hand panel for
access to the fan drive belt.
Recover the refrigerant.
STEP 133
Use a 1/2 inch ratchet drive in the belt tensioner to
relieve pressure on the belt and remove the belt from
the compressor pulley.
STEP 134
Disconnect the compressor clutch wire above the
test ports on the suction and discharge lines.
Section 50 - Climate Control - Chapter 2
50-2-82
RD02H035
RD02H038
RD02H034