New Holland T8010 Manual page 316

STEP 254
Lubricate with petroleum jelly and install three new
shaft seals.
STEP 255
Properly suppor t the FWD clutch assembly and
carefully lower into the weldment. Take care not to
damage the friction plate tabs and shaft seals.
STEP 256
Place the two halves of the shield together, making
sure the marks are aligned. Install the retaining clips.
Repeat for the opposite side.
Section 21 - Transmission, Drivelines - Chapter 6
RD05K033
RD05K021
RD05K019
21-6-63
STEP 257
Make sure that the jumper tube supply hole (1) is not
covered by the shield. Install the allen head bolts (2).
Repeat for the opposite side.
STEP 258
Properly support the FWD/Park brake assembly and
lower it into the range housing.
2
1
RD05K020
RD05K018