New Holland T8010 Manual page 1155

Hide thumbs Also See for T8010:

Table of Contents

Section 50 - Climate Control - Chapter 2

Lubricate new O-rings with clean mineral oil and

install in the fittings on the suction and liquid lines.

Connect the liquid and suction lines to the expansion

valve using the two hand, two wrench method.

Remove air and moisture from the system and

charge the system. Leak test all connections with

OEM1437 before reapplying any thermal insulation

Replace all thermal insulation tape and reconnect the

low pressure cutout switch.

NOTE: The thermal insulation tape is available in 30

ft. (9150 mm) bulk rolls - 1954475C1 - 0.12 x 2.5

inches x 30 ft. [3 x 63.5 x 9150 mm].

Chapters

Table of Contents

T8020 T8030 T8040