Recovering Contaminated Refrigerant With Oem1691; Preparing The Tank - New Holland T8010 Manual

RECOVERING CONTAMINATED REFRIGERANT WITH OEM1691

IMPORTANT: When contaminated refrigerant is
discovered with Refrigerant Identifier OEM4450,
additional care is necessary to protect your safety
and prevent the contamination of service equipment
and your refrigerant supply. Recover the refrigerant
with OEM1691 station to a recovery tank reserved for
contaminated refrigerant. Do NOT use OEM1415 or
OEM1418 to recover the contaminated refrigerant.

Preparing the Tank

STEP 12
The tank for the station may be filled with 10 to 15 psi
of dry nitrogen which must be removed before it can
be used. Remove the cap from the red valve outlet.
Open the tank valve to release the nitrogen. Close
the tank valve.
STEP 13
Use the vacuum pump (1) on OEM1415 or OEM1418
to pull a 5 minute vacuum on the tank. Connect the
tank at the location (2) shown.
Section 50 - Climate Control - Chapter 2
50-2-16
I M P O R TA N T: R e a d a l l s a fe t y w a r n i n g a n d
maintenance sections of the operator's manual
before operating the station.
WARNING: Do NOT use a tank without a
l im i t sw i tc h to r ec ove r c o nt a m i na t e d
!
refrigerant with OEM1691. The limit switch
prevents overfilling of the tank and protects
your safety.
1
M797
RR00E127
2
RR00E153