A/C Compressor Clutch; Clutch Removal - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

NOTE: This procedure shows a compressor with six screws holding the dust cover on the clutch. Your

unit has three Torx

screws for attaching the dust cover and only differs in this manner.

See this section for compressor removal. Clean the

external surfaces of the compressor before doing any

work on the compressor.

Remove the three Torx

Remove the clutch dust cover.

Section 50 - Climate Control - Chapter 2

A/C COMPRESSOR CLUTCH

screws for the clutch dust

Table of Contents

T8020 T8030 T8040