EVAPORATOR AND CAB TEMPERATURE SENSOR LOCATION
STEP 173
The evaporator temperature sensor MUST be
installed 4.2 inches (107 mm) from the left hand rear
side of the evaporator. The sensor must be installed
below the second refrigeration tube row at a 30°
downward angle.
Insert the sensor in the evaporator up to the angled
section, being careful not to kink the sensor.
STEP 174
The cab temperature sensor must be installed
without contact with any box components in the
return air stream at the rear of the HVAC box.
Section 50 - Climate Control - Chapter 2
50-2-95
1
3
Rear View
Side View
1. EVAPORATOR TEMPERATURE SENSOR
2. 4.2 INCH (107 MM)
2
RH99D218
RI00A055
3. EVAPORATOR CORE
RI03B039