Blower Motor Replacement - New Holland T8010 Manual

Hide thumbs Also See for T8010:

Table of Contents

To replace the blower motor:

1. See ACCESSING THE HVAC BOX, page 90.

2. Disconnect the blower motor assembly from the

harness at the connector.

3. Remove the four screws across the top of the

motor assembly and two screws (not visible on

photo) at the sides, and remove the assembly.

4. Install a new motor assembly with the existing

hardware and connect the motor to the harness.

Section 50 - Climate Control - Chapter 2

BLOWER MOTOR REPLACEMENT

Table of Contents

T8020 T8030 T8040