New Holland T8010 Manual page 493

Hide thumbs Also See for T8010:

Table of Contents

Mark the bearing cap and differential housing for

Remove the bolts, washers and ring clips from the

bearing caps. (13 mm socket or wrench).

Remove bearing cap retaining bolts and washer. (24

mm or 15/16 inch socket).

Section 25 - Four-Wheel Drive Front Axle - Chapter 8

DIFFERENTIAL DISASSEMBLY

Remove the bearing caps and adjusting rings.

Lift and remove the differential assembly from the

carrier. Remove the differential bearing cups from the

bearing cones. Note which side each cup originates

Chapters

Table of Contents

T8020 T8030 T8040