Table of Contents
Advertisement
LUBRICATION SYSTEM
(i}
-
Position special tool
the screws.
Guideline
I
I
Screw, oil filter cover
I
Oil pressure adapter (79429094000)
Connect the pressure testing tool to the special tool without
the T-plate.
I
Pressure testing tool (61029094000)
-
Check the engine oil level.
Danger
Danger of poisoning
inhaling them may result in unconsciousness and
death.
-
Always make sure there is sufficient ventilation
when running the engine.
-
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
-
Start the engine and let it warm up.
-
Check the oil pressure.
Oil pressure
Engine oil temperature:
80 °C (176 °F)
Engine speed: Idle
speed
Engine oil temperature:
80 °C (176 °F)
Engine speed:
6,000 rpm
If the measured value is less than the specification:
-
Check the oil pumps for wear. Check all oil channels
for free flow.
-
Switch off the engine.
Warning
Danger of burns
very hot when the machine is driven.
-
Wear appropriate protective clothing and safety
gloves. In case of burns, rinse immediately with
lukewarm water.
-
Remove the special tools.
-
Grease the O-ring of the oil filter cover. Mount the oil filter
cover.
-
Mount and tighten the screws.
Guideline
I
I
Screw, oil filter cover
with the O-ring. Mount and tighten
M6
10 Nm (7.4 lbf ft)
(8
p. 306)
(8
p. 300)
(0
p. 252)
Exhaust gases are toxic and
0.6 bar (9 psi)
1 . 7 bar (25 psi)
Some vehicle components get
M6
110 Nm (7.4 lbf ft)
20
257
Advertisement
Table of Contents
