Table of Contents
Advertisement
12 FUEL TANK, SEAT, TRIM
104
Main work
-
Check throttle cable routing.
-
Position the fuel tank and fit the two spoilers laterally to the
radiator.
-
Make sure that no cables or throttle cables are trapped or
damaged.
-
Attach the fuel tank breather hose to the fuel tank lid.
-
Mount and tighten screw
Guideline
Remaining screws,
chassis
-
Mount and tighten screws@.
Guideline
Remaining screws,
chassis
(D
-
Plug in connector
for the fuel pump.
-
Remove the wash cap set and thoroughly clean the plug-in
connection of the fuel line using compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
-
Lubricate the 0-ring and connect plug-in connection
the fuel line.
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
-
Mount the seat.
(0
p. 101)
-
Install the air filter box cover.
-
Install the right side cover.
(0
p. 48)
O
with the rubber bushing.
M6
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
M6
(0
p. 96)
(0
p. 100)
8
for
Advertisement
Table of Contents
