�
I
6.20
Lubricating the steering head bearing
,9· · · · · · · · · . . , . . . .
� ..
-,.:·
6.21
Removin the lower tri
Condition
Value not determined on removal:
-
Turn compression adjusting screw � and rebound
adjusting screw
-
Turn counterclockwise by the number of clicks corre
sponding to the fork type.
Guideline
Compression damping
Comfort
Standard
Sport
Rebound damping
Comfort
Standard
Sport
-
Mount protection cap
Condition
Value determined on removal:
-
Turn compression adjusting screw � and rebound
adjusting screw
-
Turn the adjusting screws to the position they were in
before removing.
-
Mount protection cap
-
Remove the lower triple clamp.
-
Install the lower triple clamp.
Info
The steering head bearing is cleaned and lubricated
in the course of removal and installation of the lower
triple clamp.
H02387-01
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the handlebar cushion.
-
Remove the front wheel.
-
Remove the fork legs.
-
Remove the start number plate.
-
Remove front fender.
FORK, TRIPLE CLAMP 6
48
clockwise all the way.
15 clicks
12 clicks
9 clicks
15 clicks
12 clicks
9 clicks
«8.
48
clockwise all the way.
«8.
(ra!l
p. 39)
(ra!l
p. 40)
(ra!l
p. 12)
(ra!l
p. 120)
(ra!l
p. 18)
(ra!l
p. 115)
(ra!l
p. 114)
...
...
39