Table of Contents
Advertisement
20
LUBRICATION SYSTEM
254
-
Remove screw plug @ with the short oil screen and the O
rings.
Info
Do not remove screws 6).
@)
-
Remove screw plug
with the long oil screen
O-rings.
-
Completely drain the engine oil.
-
Thoroughly clean the parts and sealing surfaces.
-
Mount and tighten screw plug @ with the short oil screen
and the O-rings.
Guideline
Screw plug, oil
screen
C,
-
Position long oil screen
-
Position the pin wrench through the drill hole of the screw
plug in the opposite section of the engine case.
-
Push the oil screen all the way into the engine case.
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
-
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
magnet
C,
and the
M20x1.5
15 Nm (11 .1 lbf ft)
with the O-rings on a pin wrench.
8
with the O-ring.
M20x1.5
15 Nm (11.1 lbf ft)
O
with the magnet and a
M12x1.5
20 Nm (14.8 lbf ft)
Advertisement
Table of Contents
