Removing The Camshaft; Removing The Cylinder Head - Husqvarna FS 450 2017 Repair Manual

17 .3.11

Removing the camshaft

17 .3.12

Removing the cylinder head

8.
Remove screws
Take off the chain adjuster with the gasket.
O.
Remove screws Take off camshaft retaining bracket@.
Pull the camshaft out of the bearing seats. Take the timing
chain from the camshaft gear. Remove the camshaft.
O.
Remove screw
8
Unscrew screws in a crisscross pattern and remove.
Remove the cylinder head.
Take off dowels (D.
Remove cylinder head gasket
ENGINE 17
C,.
177
...