Husqvarna FS 450 2017 Repair Manual page 87

SHOCK ABSORBER, LINK FORK 9
Position the frame protectors on the left and right.
Mount and tighten screws
Guideline
Screw, frame pro­
tector
Mount and tighten screws
Guideline
Screw, frame pro­
tector
Mount the cable ties.
Lift the link fork.
Mount and tighten fitting
Guideline
Nut, angle lever to
link fork
Mount the chain.
Connect the chain with connecting link
Guideline
The closed side of the chain joint lock must face in the
direction of travel.
Position the engine sprocket cover.
Mount and tighten screw
Guideline
Screw, clutch slave
cylinder
Mount and tighten screw
Guideline
Remaining screws,
chassis
Position the brake caliper and pull it back.
G01823-11
8.
M5 3 Nm (2.2 lbf ft)
8
with the washers.
M5 3 Nm (2.2 lbf ft)
C,.
M14x1 .5 80 Nm (59 lbf ft)
0.
(D
with the washer.
M6 10 Nm (7.4 lbf ft)
@.
M8 25 Nm (18.4 lbf ft)
85