Table of Contents
Advertisement
17 ENGINE
166
Position the brake line in the guide.
Mount the foot brake cylinder on push rod
•
Info
I
Ensure that the dust boot is correctly seated.
8 .
Mount and tighten screws
Guideline
Remaining screws,
M6
chassis
Position the linkage lever.
0.
Mount and tighten fitting
Guideline
Nut, linkage lever to
M14x1.5
angle lever
Info
Raise the wheel slightly to be able to mount the screw
more easily.
Mount spring Cs).
Position the positive cable on the starter motor.
Mount and tighten the nut.
Guideline
Remaining nuts,
M6
chassis
@.
Position protection cap
8
and position it.
10 Nm (7.4 lbf ft)
80 Nm (59 lbf ft)
10 Nm (7.4 lbf ft)
Advertisement
Table of Contents
