Husqvarna FS 450 2017 Repair Manual page 43

-
Position the upper triple clamp with the handlebar.
-
Mount screw
Guideline
Screw, top steering
head
-
Position the fork legs.
✓ Air bleeder screw
the front.
f)
✓ Valve
Info
Grooves are milled into the side of the upper end of
the fork legs. The second milled groove (from the top)
must be flush with the upper edge of the upper triple
H03252-12
clamp.
The air suspension is located in the left fork leg. The
pressure and rebound damping is located in the right
fork leg.
-
Tighten screws Q).
Guideline
Screw, bottom triple
clamp
-
Tighten screw
Guideline
Screw, top steering
head
-
Mount and tighten screw
Guideline
Screw, top
steering stem
FORK, TRIPLE CLAMP 6
C,
but do not tighten yet.
M20x1 .5 12 Nm (8.9 lbf ft)
0
of the right fork leg is positioned to
of the left fork leg faces the front.
12 Nm (8.9 lbf ft)
MS
C,.
M20x1 .5 12 Nm (8.9 lbf ft)
@.
MS 20 Nm (14.8 lbf ft)
®
Loctite 243
™
41