Mounting The Seat - Husqvarna FS 450 2017 Repair Manual

12.6
Mountin the seat
FUEL TANK, SEAT, TRIM
Main work
O.
Remove screw
-
Pull seat back and lift it off.
Main work
-
Mount the front of the seat on the collar bushing of the fuel
tank and the rear in the bracket.
-
Push the seat forward.
-
Make sure that the seat is locked in correctly.
-
Mount and tighten screw
Guideline
Remaining screws,
chassis
Finishing work
-
Install the air filter box cover.
O.
M6
10 Nm (7.4 lbf ft)
(� p. 96)
12
...
101