Installing The Water Pump - Husqvarna FS 450 2017 Repair Manual

Installing the water pump

17.4.8
8.
-
Remove balancer shaft
C,.
-
Remove shaft seal ring
-
Press out water pump shaft bearing
with an appropriate tool.
Info
Suitably support the clutch cover while pressing it out.
O
-
Press bearing of the water pump shaft up to the stop with
a suitable tool.
I
Pressing tool (79429006000)
• Info
I
Provide suitable support for the clutch cover while
pressing in.
8
-
Press shaft seal ring
I
Pressing tool (60029043040)
✓ The narrower chamfer faces the balancer shaft.
0
toward the inside
(a p. 305)
all the way in.
(!al p. 299)
ENGINE 17
..
193