Husqvarna FS 450 2017 Repair Manual page 36

6 FORK, TRIPLE CLAMP
34
e
I
B03537-10
Info
Without using a tool, pull the stack slightly apart
by hand.
-
Warm up the outside fork tube in area
slide bearings.
1 Guideline
so c
(122 °F)
0
-
Hold the lower slide bearing with the longer side of the
special tool.
I
Mounting tool (T14040S)
-
Slide on the outside fork tube.
-
Press the slide bearing all the way into the outside fork
tube.
-
Position the support ring.
-
Hold the seal ring with the shorter side of the special tool.
I
Mounting tool (T14040S)
-
Press the seal ring and support ring all the way into the
outside fork tube.
8.
-
Mount lock ring
✓ The lock ring engages audibly.
O.
-
Mount dust boot
f)
of the lower
(0 p. 311)
(8 p. 311)