6 FORK, TRIPLE CLAMP
6.8
18
Removing the fork legs
Warning
Danger of accidents
discs reduces the braking effect.
-
Always keep the brake discs free of oil and
grease.
-
Clean the brake discs with brake cleaner when
necessary.
-
Clean and oil the dust boots and inner fork tubes of both fork
legs.
I Universal oil spray
(8
p. 293)
-
Press the dust boots back into their installation position.
-
Remove excess oil.
Finishing work
-
Install the fork protector.
-
Remove the motorcycle from the lift stand.
Preparatory work
-
Raise the motorcycle with a lift stand.
-
Remove the front wheel.
Main work
O
-
Remove screws
and take off the clamp.
-
Allow the brake caliper and brake line to hang loosely to the
side.
8.
-
Loosen screws
Remove the left fork leg.
-
Loosen screws fi). Remove the right fork leg.
Oil or grease on the brake
(!al
p. 20)
(8
p. 12)
(0
p. 12)
(0
p. 120)