Replacing The 4X 2.5-Inch Pcie Ssd Backplane - Fujitsu PRIMERGY RX2520 M5 Upgrade And Maintenance Manual

7.5.16

Replacing the 4x 2.5-inch PCIe SSD backplane

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver
Preliminary steps
▶
"Locating the defective server" on page
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶ Remove all PCIe SSD modules from the server, see
PCIe SSD module" on page
CAUTION
▶
Ensure that all PCIe SSD modules are uniquely identified so that
you can reinsert them into their original bays after replacing the
PCIe SSD backplane.
▶
"Getting access to the component" on page
▶
"Removing the air duct" on page
▶
"Removing the fan holder" on page
Removing the defective 4x 2.5-inch PCIe SSD backplane
▶ Remove the PCIe SSD backplane, see
SSD backplane" on page
Installing the new 4x 2.5-inch PCIe SSD backplane
▶ Install the PCIe SSD backplane, see
backplane" on page
RX2520 M5
Hard disk drive (HDD) / solid state disk (SSD)
45.
183.
58.
60.
205.
"Installing the 4x 2.5-inch PCIe SSD
202.
Upgrade and Maintenance Manual
Hardware: 10 minutes
43.
65.
46.
"Removing a 2.5-inch
47.
"Removing the 4x 2.5-inch PCIe
207