Omron Z4LB V2 Instruction Manual page 86

Specifications
Item
Vibration
Sensor
resistance
Amplifier
Dielectric
Sensor
strength t th
Amplifier
Degree of protection
Connection method
Material
Weight (including package)
Attachments
Note
Z4LB-A1040V2
10 to 150 Hz, half-amplitude of 0.75 mm, acceleration of
2
100 m/s max.
10 to 150 Hz, half-amplitude of 0.15 mm acceleration of
2
20 m/s max.
1,000 VAC 50/60 Hz 1 min
300 VAC 50/60 Hz 1 min
IEC60529 IP40
Connector (Standard sensor cable length; 2 m, Standard
amp cable length; 2 m)
Sensor: Diecast zinc, Amplifier: ABS
610 g
Instruction manual, 5 labels
1 The resolution is the peak-to-peak displacement conver-
sion value for the linear output.
2 The typical value measured with only a Sensor and an
Amplifier.
3 Linearity: The value deviated from the ideal straight line
measured at the center point between Emitter and Receiver
with 5% to 95% F.S. one-side light interruption. For the
Z4LB-A1040V2 or Z4LB-A1040PV2, the range is from 0.5
to 9.5 mm.
Section
Z4LB-A3040V2
900 g
7-1
63