Omron Z4LB V2 Instruction Manual page 77

Peak-to-peak Hold
5-5 Peak-to-peak Hold
The difference between the maximum and minimum values
while timing input is ON is displayed, output, and held.
crimination outputs are controlled according to the displayed val-
ue and output value.
Timing input
Power
hold reset input
Note To clear the held value and restart measurement, turn ON the
hold reset input.
54
Sampling
The discrimination outputs are not turned OFF when the timing
input turns ON.
Display during
this period:
The measured value is output as a linear output.
ON or
Section
Displayed value (Output)
Measured value
Sampling
5-5
he dis-
T