Omron Z4LB V2 Instruction Manual page 74

Peak Hold
5-2 Peak Hold
The maximum value while the timing input is ON is displayed,
output, and held. The discrimination outputs are controlled ac-
cording to the displayed value and output value.
Timing input
Power ON or
hold reset input
Note To clear the held value and restart measurement, turn ON the
hold reset input.
Sampling
The discrimination outputs are not turned OFF when the timing
input turns ON.
Display during
this period:
The measured value is output as a linear output.
Displayed value (Output)
Measured value
Sampling
Section 5-2
51