Omron Z4LB V2 Instruction Manual page 79

Self-bottom Hold
5-7 Self-bottom Hold
The minimum value while the measured value is equal to or less
than the trigger level is displayed, output, and held. The discrimi-
nation outputs are controlled according to the displayed value
and output value.
Note When timing input is ON self-bottom hold, no sampling is per-
formed. The discrimination outputs are not turned OFF when the
timing input turns ON.
Trigger level
Power ON or
hold reset input
Note To clear the held value and restart measurement, turn ON the
hold reset input.
56
Sampling
Display during
this period:
The measured value is output as a linear output.
Section
Displayed value (Output)
Measured value
Sampling
5-7