Omron Z4LB V2 Instruction Manual page 75

Bottom Hold
5-3 Bottom Hold
The minimum value while the timing input is ON is displayed, out-
put, and held. The discrimination outputs are controlled accord-
ing to the displayed value and output value.
Timing input
Power ON or
hold reset input
Note To clear the held value and restart measurement, turn ON the
hold reset input.
52
Sampling
The discrimination outputs are not turned OFF when the timing
input turns ON.
Display during
this period:
The measured value is output as a linear output.
Section
Displayed value (Output)
Measured value
Sampling
5-3