Omron Z4LB V2 Instruction Manual page 49

Selecting the Measurement Unit
Checking and Changing the Measurement Width
The value 1 flashes.
Display
1 Set the operating mode selector to RUN.
2 Press the TEACH and SET Keys simultaneously for 3 s.
The present measurement width will be displayed.
(The default setting is 10.)
3 Press the Up Key twice and change the value from 1 to 3.
4 Press the SET Key.
The set value will be entered and the indicator will flash
twice.
10
Press the Up Key.
20
Press the Up Key.
30
Section 3-1
25