Omron Z4LB V2 Instruction Manual page 10

About this Manual:
This manual describes the installation and operation of the Z4LB V2 Parallel Beam Lin-
ear Sensor and includes the sections described below.
Please read this manual carefully and be sure you understand the information provided
before attempting to install and operate the Z4LB V2 Parallel Beam Linear Sensor.
Section 1 provides practical information on the connections, wiring, and operation of the
Z4LB V2 with a typical application example. Read this section for a quick application ref-
erence.
Section 2 provides information on preparations that must be made before turning ON the
Sensor, such as wiring, connecting, and installing Sensors and Amplifiers.
Section 3 provides information on basic settings, such as the threshold settings for good/
improper product discriminations.
Section 4 provides information on the optional functions that can be set in addition to the
basic settings.
Section 5 provides timing charts to show the operation of the hold modes.
Section 6 provides information on error messages and remedies to be taken. Refer to
this section before requesting service from your OMRON representative.
Section 7 provides the Sensor specifications and dimensions.
WARNING
!
Failure to read and understand the information provided in this
manual may result in personal injury or death, damage to the
product, or product failure. Please read each section in its
entirety and be sure you understand the information provided
in the section and related sections before attempting any of
the procedures or operations given.
vii