Installing Cards; To Install A Xircom Ethernet Iips Pc Card - HP OmniBook 800 Evaluator Manual
Corporate evaluator’s guide
Hide thumbs
Also See for OmniBook 800:
- Installation and setup manual (88 pages) ,
- User manual (79 pages) ,
- Getting started manual (54 pages)
Table of Contents
Advertisement
Installing Cards
This section describes how to install the following:
Xircom Ethernet IIps PC card.
3Com 3C562 EtherLink III LAN+33.6 Modem PC card.
Intel EtherExpress PRO/100B PCI LAN adapter.
To install a Xircom Ethernet IIps PC card
Requirements
OmniBook 800 with Windows for Workgroups 3.11 installed.
Xircom Ethernet IIps PC card.
Xircom Network Driver Disk 2 (Version 2.30 7/25/96).
Windows for Workgroups 3.11 installation disks.
Configuration
Interrupt: 11.
I/O Port address: 300, 310, 320 or 340.
Memory Range: D2000.
1. Start the OmniBook.
2. Insert the PC card.
3. From Program Manager, double-click Network group, then Network Setup.
4. Select Installing Windows Network, then click OK.
5. Click Drivers, then click Add Adapter.
6. Double-click Unlisted Or Updated Network Adapter.
7. Insert the driver disk into A:\, then click OK.
8. Select the Xircom XPS NDIS 3.0 Protected Mode driver, then click OK.
9. With the selected driver highlighted, click Setup.
Using Windows 3.x
Installing Cards
2-7
Advertisement
Table of Contents
