Table of Contents
Advertisement
Setting Up
Loading Paper
The following describes how to load paper into the standard paper tray (Tray 1).
• Do not pull out the paper tray forcefully. If you do, the tray might fall and
cause an injury.
❒ Tray 1 is letter size paper (11 × 8
× 8
1
K).
/
2
❒ Do not mix different types of paper in a single paper tray.
A
Slowly slide the paper tray out, until it stops.
B
Align all four sides of the paper stack, and then load it in the tray.
❒ To avoid paper jams, make sure paper is not stacked above the limit mark
inside the tray. Misfeeds might occur.
C
Slowly slide the paper tray back, until it stops.
For details about size and feed orientation of paper that can be loaded in
the tray, see "Paper and Other Media", Maintenance Guide.
1
K) only. Load only letter size paper (11
/
2
40
Advertisement
Table of Contents
