Table of Contents
Advertisement
Installing Options
Installing the Paper Feed Unit
If you have already installed the optional duplex unit, 2 tray finisher, or booklet
finisher, remove all these options before installing the optional paper feed
unit.
❒ Before installation, check the orientation of the paper feed unit or 2000-sheet
large capacity tray you want to place.
❒ When installing multiple options, install the paper feed unit first.
❒ Four people are needed to install the paper feed unit. Start installation when
all four people are ready.
• When moving the machine, each person should hold a handle, located on
two sides of the printer, and then lift slowly. Lifting carelessly or dropping it
may cause injury.
❒ Basic model printer weighs approximately 83.3 kg (183.7 lb.), duplex unit
standard model printer weighs approximately 92.5 kg (203 lb.).
Installing Paper Feed Unit Type 7300 (500 × 1)
• When moving the paper feed unit, hold the bottom of both sides, and then
lift slowly. Lifting carelessly or dropping it may cause injury.
❒ The 500-sheet paper feed unit weighs approximately 18 kg (39.7 lb.).
A
Turn off the power then unplug the power cable, and then interface ca-
ble.
55
Advertisement
Table of Contents
