Unpacking - Ricoh C7528 Setup Manual

Gestetner c7528: setup guide
Hide thumbs Also See for C7528:
Table of Contents

Advertisement

Setting Up

Unpacking

To protect it from shock and vibration during transit, this printer comes packaged
in cushioning foam and secured with tape. Remove these protective materials
after bringing the machine to where it will be installed.
• When lifting the machine, use the inset grips on both sides. The printer
could break or cause an injury if dropped.
• Place no objects on the front cover.
❒ Basic model printer weighs approximately 83.3 kg (183.7 lb.), duplex unit
standard model printer weighs approximately 92.5 kg (203 lb.).
A
Remove the plastic bag.
B
Lift the printer with four people by using the inset grips on both sides of
the printer.
❒ To move the printer, four people should hold the handles located on the
sides.
❒ Leave the tape holding the paper feed tray and cover in place while moving
the printer.
❒ Lower the machine slowly and carefully to prevent trapping your hands.
28

Advertisement

Table of Contents
loading

Table of Contents