Network Setup - Ricoh C7528 Setup Manual

Configuration
N
Press the {U} or {T} key to display [DHCP], and then press the {# Enter}
key.

Network Setup:

DHCP
O
Press the {U} or {T} key to display [On], and then press the {# Enter} key.
DHCP:
*On
❒ "p" shows the current setting.
❒ After about two seconds, the display returns to the network setup menu.
P
If you use NetWare, select the frame type for NetWare.
Select one of the items below if necessary.
• Auto Select (Default)
• Ethernet II
• Ethernet 802.2
• Ethernet 802.3
• Ethernet SNAP
❒ Usually, use the default setting ("Auto Select"). When you first select "Auto
Select", the frame type detected by the printer is adopted. If your network
can use more than two frame types, the printer may fail to select the correct
frame type if "Auto Select" is selected. In this case, select the appropriate
frame type.
Q
Press the {U} or {T} key to display [Frame Type (NW)], and then press the
{# Enter} key.
Network Setup:
Frame Type (NW)
The current setting appears on the display.
R
Press the {U} or {T} key to display the frame type you want to use, and
then press the {# Enter} key.
Frame Type (NW):
*Auto Select
126