Connecting the Printer
Network Connection
Follow the procedure below to connect the printer to the computer through the
network. Prepare the hub and other network devices before connecting the
10BASE-T or 100BASE-TX cable to the machine's ethernet port.
Alternatively, the optional gigabit ethernet board, which supports 1000BASE-T,
is available.
❒ Use shielded ethernet cable. Unshielded cables create electromagnetic inter-
ference that could cause malfunctions.
❒ Ethernet cable is not supplied with this machine. Select your cable according
to the network environment.
A
A core for the ethernet cable is supplied with this machine. Make a loop
at the end of the ethernet cable.
B
Connect the ethernet cable to the ethernet port.
G1307525_1.00
115
Copyright © 2005