Connecting A Digital Camera - Ricoh C7528 Setup Manual

Connecting the Printer
C
Connect the opposite end's flat connector to devices such as your com-
puter's USB interface, or a USB hub.
For details about settings for USB connection printing, see Software Guide.

Connecting a digital camera

This printer supports direct printing, which allows you to print images taken with
digital cameras without using a computer. The following describes how to con-
nect the printer to a digital camera.
❒ This function requires the following optional units:
• USB Host Interface Unit Type 7300 (Optional Interface Unit)
• Camera direct print card Type 7300 (Expansion Card)
❒ The PictBridge card is supplied with a USB cable and a hook onto which you
can roll up and hang the cable.
❒ Make sure your digital camera supports PictBridge.
A
Make sure power to the printer and your digital camera is switched on.
B
Use the USB cable supplied with the PictBridge card to connect the
printer and the digital camera. Connect the flat connector of the USB ca-
ble to the USB host interface unit.
119