Table of Contents
Advertisement
Installing Options
C
Fasten the duplex feed unit using a short screw and the provided screw-
driver.
❒ Be sure to return the provided screwdriver to its original position on the in-
side of the front cover.
This completes installation of the duplex feed unit.
D
Slowly close the front cover slowly by pressing the two areas on the left
and right.
❒ After finishing installation, check the duplex unit is installed properly: print
the configuration page from the "List/Test Print" menu. If it is installed prop-
erly, you will see "Duplex Unit" for "Connection Equipment".
❒ If the duplex unit is not installed properly, reinstall it from the start of the
procedure. If you cannot install it properly even after attempting reinstalla-
tion, contact your sales or service representative.
For details about printing the configuration page, see
p.46 "Test
Printing".
113
Advertisement
Table of Contents
