Table of Contents
Advertisement
Installing Options
E
Insert the IEEE 1284 interface board until it stops, and then secure it by
tightening its two screws.
Check the IEEE 1284 interface board is connected firmly to the controller
board.
❒ Be sure to return the provided screwdriver to its original position on the in-
side of the front cover.
❒ After finishing installation, check the IEEE 1284 interface board is installed
properly: print the configuration page from the "List/Test Print" menu. If it is
installed properly, you will see "Parallel Interface" for "Device Connection".
❒ If the IEEE 1284 interface board is not installed properly, reinstall it from
the start of the procedure. If you cannot install it properly even after at-
tempting reinstallation, contact your sales or service representative.
For details about printing the configuration page, see
p.46 "Test
Printing".
98
Advertisement
Table of Contents
