Table of Contents
Advertisement
Installing Options
J
Insert the claws of the stand into the holes ( ) on the left side of the
printer, and then push down ( ).
K
Tighten the four long screws fastening the duplex reversal unit stand,
using provided screwdriver. Fasten in the order of
shown.
This completes installation of the stand. Next, install the duplex reversal unit.
Installing the Duplex Reversal Unit
A
Using both hands, hold the duplex reversal unit level, and then insert the
hooks into the groove of the stand. Align the hook tips with the line on
the stand, as shown, and then insert slowly. Do not let go of the duplex
reversal unit even after insertion.
⇒ ⇒ ⇒ , as
108
Advertisement
Table of Contents
