Table of Contents
Advertisement
Configuration
The settings are made and after about two seconds, the screen returns to the
IEEE 1394 setting menu.
I
Set [Subnet Mask1394] in the same way.
J
Press the {Online} key.
The initial screen appears.
K
Print a configuration page to confirm the settings made.
For details about printing the configuration page, see
SCSI print
A
Press the {Menu} key.
The [Menu] screen appears on the display.
B
Press the {U} or {T} key to display [Host Interface], and then press the {#
Enter} key.
Menu:
Host Interface
The interface setting menu appears.
C
Press the {U} or {T} key to display [IEEE 1394 Setup], and then press the
{# Enter} key.
The IEEE 1394 setting menu appears.
D
Set [SCSI print] and [Bidi-SCSI print] if necessary.
❒ The default setting is "Active".
E
Press the {U} or {T} key to display [SCSI print], and the press the {# Enter}
key.
p.46 "Test
Printing".
136
Advertisement
Table of Contents
