Table of Contents
Advertisement
5)
Press qw to set [ENABLE].
f For details, refer to [WIRELESS LAN] (x page 177).
6)
Press the <MENU> button.
f The [NETWORK] screen is displayed.
7)
Press as to select [NETWORK STATUS], and press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
8)
Press qw to display [WIRELESS LAN] (page 2/3).
f Confirm [SSID] and [KEY].
Note
f [WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50 Series) is not attached to the <USB> terminal.
f Attach the Wireless Module to the <USB> terminal directly without using a USB extension cable or USB hub.
f If the indicator on the Wireless Module does not illuminate/blink even when the projector is turned on, re-insert the Wireless Module into the
<USB> terminal.
Operating the computer
1)
Turn on the computer.
2)
Perform the network setting.
f Perform the network setting on the computer following the instruction of the network administrator so that it
can be connected to the projector.
3)
Connect the Wireless Module to the projector via wireless LAN.
f When connecting, confirm the [WIRELESS LAN] setting displayed in the [NETWORK STATUS] screen of
the projector.
Note
f If you use wireless LAN connection utility that is standard for your OS, follow the operation procedure of the utility you use to connect to the
network.
186 - ENGLISH
Chapter 5 Operations — Network connection
Advertisement
Table of Contents
