Table of Contents
Advertisement
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [EDID MODE] of the corresponding input.
4)
Press the <ENTER> button.
f The [DVI-D EDID MODE] screen is displayed.
5)
Press qw to switch [EDID MODE].
f The items will switch each time you press the button.
[DEFAULT]
[USER]
f Proceed to Step 10) when [DEFAULT] is selected.
6)
Press the <ENTER> button.
f The [RESOLUTION] screen is displayed.
7)
Press asqw to select [RESOLUTION].
f Select [1024x768p], [1280x720p], [1280x800p], [1280x1024p], [1366x768p], [1400x1050p], [1440x900p],
[1600x900p], [1600x1200p], [1680x1050p], [1920x1080p], [1920x1080i], or [1920x1200p].
8)
Press the <ENTER> button.
f The [VERTICAL SCAN FREQUENCY] screen is displayed.
9)
Press qw to select [VERTICAL SCAN FREQUENCY].
f Select [60Hz], [50Hz], [30Hz], [25Hz], or [24Hz] when [1920x1080p] is selected for [RESOLUTION].
f Select [60Hz], [50Hz], or [48Hz] when [1920x1080i] is selected for [RESOLUTION].
f Select [60Hz] or [50Hz] when anything other than following is selected for [RESOLUTION].
g [1920x1080p], [1920x1080i]
10) Press the <ENTER> button.
f The confirmation screen is displayed.
11) Press qw to select [OK], and press the <ENTER> button.
Note
f The settings in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] are displayed in [EDID STATUS].
f Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
f The computer, video device, or projector in use may require the power to be turned off and on again after configuring settings.
f The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
When the optional Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10) is installed
Setting [SIGNAL LEVEL] in [SLOT IN] (DisplayPort input)
1)
Press as to select [SLOT IN].
2)
Press the <ENTER> button.
f The [SLOT IN] screen is displayed.
3)
Press as to select [SIGNAL LEVEL] of the corresponding input.
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
128 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Standard setting.
Sets the [RESOLUTION] and [VERTICAL SCAN FREQUENCY] items as EDID.
Automatically sets the signal level.
Select this item when the signal output from the HDMI terminal of the external device (such as a Blu-
ray disc player) is input to the <DisplayPort IN 1> terminal or the <DisplayPort IN 2> terminal using a
conversion cable, etc.
Select this item when the signal output from the DisplayPort terminal of the external device (such as a
computer) is input to the <DisplayPort IN 1> terminal or the <DisplayPort IN 2> terminal.
Select this item also when the signal output from the HDMI terminal of a computer, etc., is input to the
<DisplayPort IN 1> terminal or the <DisplayPort IN 2> terminal using a conversion cable, etc.
Advertisement
Table of Contents
