Table of Contents
Advertisement
Note
f The setting details are displayed in [RESOLUTION] and [VERTICAL SCAN FREQUENCY] of [EDID STATUS].
f Setting of the resolution and the vertical scanning frequency may be necessary on the computer or video device in use.
f The computer, video device, or projector in use may require the power to be turned off and on again after configuring settings.
f The output with the set resolution or vertical scanning frequency may not be possible depending on the computer or video device in use.
[DVI-D IN]
Set this item in accordance with the video signal input to the <DVI-D IN> terminal.
Setting [SIGNAL LEVEL] in [DVI-D IN]
1)
Press as to select [DVI-D IN].
2)
Press the <ENTER> button.
f The [DVI-D IN] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[0-255:PC]
[16-235]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
Setting [EDID SELECT] in [DVI-D IN]
1)
Press as to select [DVI-D IN].
2)
Press the <ENTER> button.
f The [DVI-D IN] screen is displayed.
3)
Press as to select [EDID SELECT].
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[EDID3]
[EDID1]
[EDID2:PC]
Note
f The data for plug and play will change when the setting is changed. Refer to "List of compatible signals" (x page 245) for details on a
resolution that supports plug and play.
Setting [EDID MODE] in [DVI-D IN]
1)
Press as to select [DVI-D IN].
2)
Press the <ENTER> button.
f The [DVI-D IN] screen is displayed.
3)
Press as to select [EDID MODE].
Chapter 4 Settings — [DISPLAY OPTION] menu
Automatically sets the signal level.
Select this item when the signal output from the DVI-D terminal of the external device (such as a
computer) is input to the <DVI-D IN> terminal.
Select this item when the signal output from the HDMI terminal of the external device (such as a Blu-
ray disc player) is input to the <DVI-D IN> terminal using a conversion cable, etc.
Determines the moving image or still image signal automatically.
Select this item mainly when an external device that will output the moving image signal (such as a
Blu-ray disc player) is connected to the <DVI-D IN> terminal.
Select this item mainly when an external device that will output the still image signal (such as a
computer) is connected to the <DVI-D IN> terminal.
ENGLISH - 121
Advertisement
Table of Contents
