Table of Contents
Advertisement
5)
Press as to select [APPLY].
6)
Press the <ENTER> button.
f The confirmation screen is displayed.
7)
Press qw to select [OK], and press the <ENTER> button.
Note
f If the consolidated runtime of the projector exceeds 20 000 hours, replacement of the components inside the projector may be required. The
consolidated runtime can be confirmed in the [STATUS] screen. Refer to the [PROJECTOR SETUP] menu → [STATUS] for details.
Setting [MAX LIGHT OUTPUT LEVEL]
Adjust the maximum level to correct screen brightness according to the changes in brightness of the light source.
1)
Press as to select [OPERATION SETTING].
2)
Press the <ENTER> button.
f The [OPERATION SETTING] screen is displayed.
3)
Press as to select [MAX LIGHT OUTPUT LEVEL].
4)
Press qw to adjust.
Operation
Press w.
Press q.
5)
Press as to select [APPLY].
6)
Press the <ENTER> button.
f The confirmation screen is displayed.
7)
Press qw to select [OK], and press the <ENTER> button.
Note
f [MAX LIGHT OUTPUT LEVEL] cannot be adjusted when [OPERATING MODE] is set to [NORMAL], [ECO], [QUIET], [QUIET1], or
[QUIET2].
f The brightness is corrected using this setting when the [PROJECTOR SETUP] menu → [BRIGHTNESS CONTROL] → [BRIGHTNESS
CONTROL SETUP] → [CONSTANT MODE] is set to [AUTO] or [PC].
Setting [LIGHT OUTPUT]
Adjust the brightness of light source.
The [LIGHT OUTPUT] setting is synchronized with the [PROJECTOR SETUP] menu → [LIGHT OUTPUT]. The
most recent setting is reflected in both items.
1)
Press as to select [OPERATION SETTING].
2)
Press the <ENTER> button.
f The [OPERATION SETTING] screen is displayed.
3)
Press as to select [LIGHT OUTPUT].
4)
Press qw to adjust.
Operation
Press w.
Press q.
*1 The upper limit of the adjustment range is the value set in the [PROJECTOR SETUP] menu → [OPERATION SETTING] → [MAX LIGHT
OUTPUT LEVEL].
5)
Press as to select [APPLY].
6)
Press the <ENTER> button.
f The confirmation screen is displayed.
144 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Increases the maximum level of brightness correction.
Decreases the maximum level of brightness correction.
Brightness
The screen becomes brighter.
The screen becomes darker.
Adjustment
Adjustment
Runtime
The runtime becomes shorter.
The runtime becomes longer.
Range of adjustment
PT-RCQ10: 8.0 % - 100.0 %
PT-RCQ80: 10.0 % - 100.0 %
Range of adjustment
PT-RCQ10: 8.0 % - 100.0 %
*1
PT-RCQ80: 10.0 % - 100.0 %
*1
Advertisement
Table of Contents
